TC4428ACOA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 12Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4428A |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 17.975V |
| Max Output Current | 1.5A |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 470mW |
| Output Current | 1.5A |
| Max Supply Current | 2mA |
| Propagation Delay | 35 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Input Bias Current | 10μA |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height | 1.4986mm |
| Length | 4.8768mm |
| Width | 3.9116mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4428ACOA Overview
The 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.A packaging method of Tube is indicated.Surface Mount is mounted in the way.In the absence of a 4.5V~18V supply voltage, it can demonstrate its superiority.This gate type has a N-Channel, P-Channel MOSFET design.In this device, temperatures must not exceed 0°C~150°C TJ.The input type for this program is Inverting, Non-Inverting.Initially, the configuration is composed of 8 terminations.Under its base part number TC4428A, various related parts can be found.Mounting the device requires Surface Mount.As a result, it is configured with 8 pins when it is designed.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.An output current as high as 1.5A can be achieved at maximum power.Several electronic components are included in its subcategory of MOSFET Drivers.The number of component pins is 8.The basis of the model has 2 outputs integrated.This device supports a current output of 1.5A at the output.Its maximum power dissipation of 470mW also demonstrates its maximum ability to transfer power without overheating.If you want a stable supply current, you should keep it at 2mA.The voltage it outputs is 17.975V.A resistance value of 12Ohm is required to operate this device.
TC4428ACOA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
Resistance of 12Ohm
TC4428ACOA Applications
There are a lot of Microchip Technology TC4428ACOA gate drivers applications.
- Smart Phones
- Isolated Supplies for controller area network (CAN),
- High-speed communications
- UPS systems
- Multicolor LED/laser displays
- Motor Drives
- A/D drivers
- LCD/LCoS/DLP portable and embedded pico projectors
- Motor Controls
- Line drivers
