TC4428ACPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 12Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Base Part Number | TC4428A |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 17.975V |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 730mW |
| Output Current | 1.5A |
| Max Supply Current | 2mA |
| Propagation Delay | 35 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Input Bias Current | 10μA |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height | 4.06mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4428ACPA Overview
A higher degree of flexibility is achieved by adopting its 8-DIP (0.300, 7.62mm) package.A package of Tube has been used.Through Hole is the way in which it is mounted.When the supply voltage is 4.5V~18V it is able to demonstrate its superiority.This gate type has a N-Channel, P-Channel MOSFET design.This device can operate at temperatures up to 0°C~150°C TJ.The input type is Inverting, Non-Inverting.The configuration is based on 8 terminations.You will find various related parts under the base part number TC4428A.In this case, Through Hole indicates how the device is to be mounted.When the device is designed, it has 8 pins.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.There is an output current limit of 1.5A for this device.There are various useful electronic components in its subcategory MOSFET Drivers.There are 8 component pins on the board.The basis of this model has 2 outputs integrated.Mosfet gate drivers can deliver a current of 1.5A.Its maximum power dissipation of 730mW also demonstrates its maximum ability to transfer power without overheating.For higher stability, the supply current should be kept at 2mA.17.975V is the output voltage.Mosfet gate drivers is recommended that the operating voltage of the supply be set at 15V.The device operates with a resistance of 12Ohm.
TC4428ACPA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
Resistance of 12Ohm
TC4428ACPA Applications
There are a lot of Microchip Technology TC4428ACPA gate drivers applications.
- Industrial motor drives - compact, standard, premium, servo drives
- Motor Drives
- Isolated Supplies for controller area network (CAN),
- Motor Control
- AC-DC Inverters
- Motor Controls
- serial peripheral interface (SPI), I2C
- Automotive Applications
- UPS systems
- Industrial Motor Inverter - Power Tools, Robotics
