TC4428AEJA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-CDIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Base Part Number | TC4428A |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 800mW |
| Max Supply Current | 4.5mA |
| Propagation Delay | 50 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.06 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4428AEJA Overview
There is greater flexibility with the 8-CDIP (0.300, 7.62mm) package.Tube is the packaging method.This device is equipped with 2 drivers for its configuration.Its recommended mounting way is Through Hole.In the absence of a 4.5V~18V supply voltage, its superiority can be demonstrated.N-Channel, P-Channel MOSFET is the gate type used for this design.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.Mosfet driver accepts input of type Inverting, Non-Inverting.Its configuration starts with 8 terminations.There are various parts that can be found under its base part number TC4428A.The mount method is Through Hole.When designing, the device is configured with 8 pins.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 1.5A that can be achieved.There are several useful electronic components within its subcategory MOSFET Drivers.There are 8 component pins on the board.Its maximum power dissipation of 800mW shows its power loss capacity without overheating.Mosfet gate drivers is recommended to keep the supply current at 4.5mA to ensure greater stabilMosfet gate driversy.
TC4428AEJA Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 800mW
TC4428AEJA Applications
There are a lot of Microchip Technology TC4428AEJA gate drivers applications.
- Head-up and Head mounted displays
- AC-DC Inverters
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Commercial air-conditioning (CAC)
- DC-DC Converters
- serial peripheral interface (SPI), I2C
- Isolated Supplies for Motor Control
- Motor controllers
- Motor Controls
- High-speed communications
