TC4428AEOA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4428A |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 470mW |
| Output Current | 1.5A |
| Max Supply Current | 2mA |
| Propagation Delay | 35 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.045 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.045 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4428AEOA713 Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.The packaging method is indicated by Tape & Reel (TR).Configuration is supported by 2 drivers.Surface Mount is the way in which it is mounted.Using a 4.5V~18V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.N-Channel, P-Channel MOSFET is the gate type used for this design.This device allows temperatures in the range of -40°C~150°C TJ.This program uses the input type of Inverting, Non-Inverting.As a result of its configuration, it contains a maximum of 8 terminations.Under its base part number TC4428A, various related parts can be found.Surface Mount is the way it takes to mount the device.At the time of design, it is configured with 8 pins.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.There is an output current limit of 1.5A for this device.There are several useful electronic components in this subcategory of MOSFET Drivers.A total of 8 pins are available for component connections.The device is capable of delivering a current of 1.5A.This device has a maximum power dissipation of 470mW, indicating that it is capable of reducing power loss without overheating.Mosfet gate drivers is recommended that you keep the supply current at 2mA in order to achieve greater stabilMosfet gate driversy.
TC4428AEOA713 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC4428AEOA713 Applications
There are a lot of Microchip Technology TC4428AEOA713 gate drivers applications.
- A/D drivers
- Isolated Supplies for Motor Control
- Portable computers
- Isolated Supplies for controller area network (CAN),
- Solar inverters
- Motor Controls
- Industrial Motor Inverter - Power Tools, Robotics
- Isolated Gate Driver Supplies
- Commercial air-conditioning (CAC)
- High-speed communications
