TC4428AEUA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 340mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4428A |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 340mW |
| Max Supply Current | 2mA |
| Propagation Delay | 35 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.045 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.045 μs |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4428AEUA713 Overview
For greater flexibility, the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package is adopted.Tape & Reel (TR) represents the package.There are 2 drivers installed for this device.Surface Mount is mounted in the way of the device.In the absence of a 4.5V~18V supply voltage, its superiority can be demonstrated.This device is designed with a N-Channel, P-Channel MOSFET gate type.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Inverting, Non-Inverting is used as the input type.As a result of its configuration, it contains a maximum of 8 terminations.There are numerous related parts listed under its base part number TC4428A.Mosfet driver is mounted using the Surface Mount method.Devices have 8 pins available.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.As a maximum, there is 1.5A limit to the output current.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The number of component pins is 8.According to its maximum power dissipation, 340mW is capable of conducting and transferring a large amount of power without overheating.For higher stability, the supply current should be kept at 2mA.
TC4428AEUA713 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 340mW
TC4428AEUA713 Applications
There are a lot of Microchip Technology TC4428AEUA713 gate drivers applications.
- RGB applications
- Digitally controlled power supplies
- Broadcast equipment
- DC-DC Converters
- Telecom switch mode power supplies
- General Purpose 3-Phase Inverter
- Automotive Applications
- High-speed communications
- Motor Controls
- Isolated switch mode power supplies (SMPS)
