TC4428AVMF713
| Parameters | |
|---|---|
| Max Supply Current | 2mA |
| Propagation Delay | 35 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.05 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.05 μs |
| Height Seated (Max) | 0.95mm |
| Length | 6mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4428A |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Nominal Supply Current | 4.5mA |
TC4428AVMF713 Overview
Its 8-VDFN Exposed Pad package is adopted for higher flexibility.A packaging method of Tape & Reel (TR) is used.Gate drivers is configured wGate driversh 2 drivers.Surface Mount is mounted in the way of the device.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.5V~18V.This gate type has a N-Channel, P-Channel MOSFET design.Temperature range -40°C~150°C TJ is allowed for this device.Inverting, Non-Inverting is used as the input type in this program.Its configuration is based on a total of 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number TC4428A.The device is mounted with Surface Mount.When designing, the device is configured with 8 pins.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.An output current as high as 1.5A can be achieved at maximum power.Several electronic components are included in its subcategory of MOSFET Drivers.The board has 8 component pins.Mosfet gate drivers is recommended that you keep the supply current at 2mA in order to achieve greater stabilMosfet gate driversy.
TC4428AVMF713 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
TC4428AVMF713 Applications
There are a lot of Microchip Technology TC4428AVMF713 gate drivers applications.
- Dual-Battery Systems
- Motor Control
- Uninterruptible Power Supplies (UPS)
- serial peripheral interface (SPI), I2C
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Welding
- Broadcast equipment
- RGB applications
- UPS systems
- Portable computers
