TC4428CPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 12Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Base Part Number | TC4428 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 18V |
| Max Output Current | 1.5A |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 730mW |
| Output Current | 1.5A |
| Max Supply Current | 4.5mA |
| Propagation Delay | 50 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 50 ns |
| Max Output Voltage | 17.975V |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Input Bias Current | 10μA |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Height | 4.06mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4428CPA Overview
For greater flexibility, the 8-DIP (0.300, 7.62mm) package is adopted.The packaging method is indicated by Tube.Through Hole is mounted in the way.WGate driversh a 4.5V~18V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.N-Channel, P-Channel MOSFET is the gate type used for this design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.This program uses the input type of Inverting, Non-Inverting.The configuration is based on 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number TC4428.In this case, Through Hole indicates how the device is to be mounted.During design, it is configured with 8 pins.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.An output current as high as 1.5A can be achieved at maximum power.There are several useful electronic components in this subcategory of MOSFET Drivers.The board contains 8 pins for component connections.For its basis, 2 outputs are integrated.The device is capable of delivering a current of 1.5A.Its maximum power dissipation of 730mW shows its power loss capacity without overheating.Mosfet gate drivers is recommended that you keep the supply current at 4.5mA in order to achieve greater stabilMosfet gate driversy.Mosfet gate drivers produces a voltage of 18V.With a resistance of 12Ohm, it operates.Mosfet driver ic is recommended that the maximum output voltage be kept at 17.975V.
TC4428CPA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
Resistance of 12Ohm
TC4428CPA Applications
There are a lot of Microchip Technology TC4428CPA gate drivers applications.
- Refrigerator
- Commercial and agricultural vehicles (CAV)
- Isolated switch mode power supplies (SMPS)
- UPS systems
- Motor Drives
- 3-Phase Motor Inverter Driver
- Multicolor LED/laser displays
- Solar power supplies
- Power factor correction (PFC) circuits
- AC-DC Inverters
