TC4428VMF713
| Parameters | |
|---|---|
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4428 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Nominal Supply Current | 4.5mA |
| Max Supply Current | 4.5mA |
| Propagation Delay | 50 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 19ns 19ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Height Seated (Max) | 0.95mm |
| Length | 6mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
TC4428VMF713 Overview
For greater flexibility, its 8-VDFN Exposed Pad package is used.A package of Tape & Reel (TR) has been used.A total of 2 drivers are integrated into its configuration.In the direction of Surface Mount, gate drivers is mounted.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~18V supply voltage.There is a gate type of N-Channel, P-Channel MOSFET in this design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Inverting, Non-Inverting is used as the input type.Initially, the configuration is composed of 8 terminations.Numerous related parts are available for its base part number TC4428.The device is mounted with Surface Mount.When the device is designed, it has 8 pins.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.1.5A is the maximum output current.There are several useful electronic components found in its subcategory of MOSFET Drivers.There are 8 component pins on the board.Mosfet gate drivers is recommended that you keep the supply current at 4.5mA in order to achieve greater stabilMosfet gate driversy.
TC4428VMF713 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
TC4428VMF713 Applications
There are a lot of Microchip Technology TC4428VMF713 gate drivers applications.
- DC/DC converters
- Power factor correction (PFC) circuits
- Industrial Power Supplies
- Industrial Motor Inverter - Power Tools, Robotics
- Video amplifiers
- Isolated Supplies for Motor Control
- Solar power supplies
- High power buffers
- Isolated Supplies for controller area network (CAN),
- Motor Control
