Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
MOSFET Drivers |
Max Power Dissipation |
470mW |
Technology |
CMOS |
Voltage - Supply |
4.5V~18V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
TC4428 |
Pin Count |
8 |
Max Output Current |
1.5A |
Memory Size |
2kB |
Nominal Supply Current |
4.5mA |
RAM Size |
72B |
Memory Type |
EPROM |
Power Dissipation |
470mW |
Max Supply Current |
4.5mA |
Propagation Delay |
50 ns |
Input Type |
Inverting, Non-Inverting |
Turn On Delay Time |
50 ns |
Watchdog Timer |
Yes |
Data Bus Width |
8b |
Number of Timers/Counters |
1 |
Rise Time |
30ns |
Fall Time (Typ) |
30 ns |
Core Architecture |
PIC |
Rise / Fall Time (Typ) |
19ns 19ns |
Max Frequency |
20MHz |
Interface IC Type |
BUFFER OR INVERTER BASED MOSFET DRIVER |
Channel Type |
Independent |
Number of Programmable I/O |
20 |
Number of Drivers |
2 |
Turn On Time |
0.04 μs |
Output Peak Current Limit-Nom |
1.5A |
Driven Configuration |
Low-Side |
Gate Type |
N-Channel, P-Channel MOSFET |
Current - Peak Output (Source, Sink) |
1.5A 1.5A |
High Side Driver |
YES |
Logic Voltage - VIL, VIH |
0.8V 2.4V |
Turn Off Time |
0.06 μs |
Length |
4.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TC4428VOA713 Overview
Its 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.The packaging method is indicated by Tape & Reel (TR).2 drivers are incorporated for its configuration.Gate drivers is mounted in the way of Surface Mount.When the supply voltage is set to 4.5V~18V, it can demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET has been used in its design.The allowable temperature range that this device can be operated in is -40°C~150°C TJ.This program uses the input type of Inverting, Non-Inverting.It's configured with 8 terminations.There are various related parts under its base part number TC4428.The mount method is Surface Mount.As a result, it is configured with 8 pins when it is designed.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.There is an output current limit of 1.5A for this device.Its subcategory of MOSFET Drivers contains various useful electronic components.The board has a total of 8 component pins.Based on the maximum power dissipation of 470mW, it is clear that it is capable of transferring and conducting power losses without becoming overheated.As a precaution, make sure the supply current is kept at 4.5mA.
TC4428VOA713 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC4428VOA713 Applications
There are a lot of Microchip Technology TC4428VOA713 gate drivers applications.
- Active Clamp Flyback or Forward and Synchronous Rectifier
- DC/DC converters
- Solar power supplies
- Smart Phones
- High current laser/LED systems
- Dual-Battery Systems
- Automotive Applications
- Broadcast equipment
- Industrial Power Supplies
- Motor Controls