TC4429CPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC4429 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 18V |
| Max Output Current | 6A |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 3mA |
| Power Dissipation | 730mW |
| Output Current | 6A |
| Max Supply Current | 1.5mA |
| Propagation Delay | 75 ns |
| Input Type | Inverting |
| Turn On Delay Time | 100 ps |
| Max Output Voltage | 17.975V |
| Rise Time | 60ns |
| Fall Time (Typ) | 35 ns |
| Turn-Off Delay Time | 100 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Input Bias Current | 10μA |
| Output Peak Current Limit-Nom | 6A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 4.06mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4429CPA Overview
Gate drivers provides greater flexibilGate driversy to use the 8-DIP (0.300, 7.62mm) package.Tube represents the package.Gate drivers is mounted in the way of Through Hole.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~18V supply voltage.There is a gate type of N-Channel, P-Channel MOSFET in this design.Temperature range 0°C~150°C TJ is allowed for this device.Input type of Inverting is used.Initially, the configuration is composed of 8 terminations.There are numerous related parts listed under its base part number TC4429.Mosfet driver is mounted using Through Hole.Devices have 8 pins available.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.In the maximum case, the output current can be 6A volts.Several electronic components are included in its subcategory of MOSFET Drivers.The component has 8 pins.For its basis, 1 outputs are integrated.The device is capable of delivering a current of 6A.Based on its maximum power dissipation of 730mW, it is clear that it is capable of transferring and conducting power loss without overheating.As a precaution, make sure the supply current is kept at 1.5mA.As a result, a voltage of 18V is produced.During the operation of the system, the voltage of the operating supply should be set to 15V.You should keep the maximum output voltage at 17.975V as much as possible.
TC4429CPA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC4429CPA Applications
There are a lot of Microchip Technology TC4429CPA gate drivers applications.
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Pulse transformer drivers
- Industrial Motor Inverter - Power Tools, Robotics
- Isolated switch mode power supplies (SMPS)
- Welding
- High current laser/LED systems
- Industrial Modules
- Solar power supplies
- DC-DC Converters
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
