TC4431CPA
| Parameters | |
|---|---|
| Length | 9.5mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~30V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC4431 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 1.5A |
| Power Supplies | 4.5/30V |
| Nominal Supply Current | 4mA |
| Power Dissipation | 730mW |
| Max Supply Current | 4mA |
| Propagation Delay | 90 ns |
| Input Type | Inverting |
| Turn On Delay Time | 90 ns |
| Rise Time | 40ns |
| Fall Time (Typ) | 50 ns |
| Rise / Fall Time (Typ) | 25ns 33ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
TC4431CPA Overview
Gate drivers provides greater flexibilGate driversy to use the 8-DIP (0.300, 7.62mm) package.Tube is the packaging method.It's mounted on the way to Through Hole.When the supply voltage is set to 4.5V~30V, it can demonstrate its superiority.There is a gate type of N-Channel, P-Channel MOSFET in this design.Temperature range 0°C~150°C TJ is allowed for this device.This program uses the input type of Inverting.As a result of its configuration, it contains a maximum of 8 terminations.There are various parts that can be found under its base part number TC4431.Devices are mounted by Through Hole.In the device, there are 8 pins.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible for the output current to be as low as 1.5A.Its subcategory of MOSFET Drivers contains various useful electronic components.8 pins are present on the component.The basis of the model has 1 outputs integrated.Using 730mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.Mosfet gate drivers is recommended to keep the supply current at 4mA to ensure greater stabilMosfet gate driversy.Due to its power supply of 4.5/30V, it provides an effective solution to power supply problems for a wide range of applications.
TC4431CPA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC4431CPA Applications
There are a lot of Microchip Technology TC4431CPA gate drivers applications.
- Active filtering
- Head-up and Head mounted displays
- Solar power supplies
- 3-Phase Motor Inverter Driver
- Dual-Battery Systems
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Line drivers
- A/D drivers
- Automotive Applications
- Industrial motor drives - compact, standard, premium, servo drives
