TC4431EPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~30V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC4431 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Power Supplies | 4.5/30V |
| Nominal Supply Current | 4mA |
| Power Dissipation | 730mW |
| Max Supply Current | 4mA |
| Propagation Delay | 90 ns |
| Input Type | Inverting |
| Turn On Delay Time | 90 ns |
| Rise Time | 40ns |
| Fall Time (Typ) | 50 ns |
| Rise / Fall Time (Typ) | 25ns 33ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4431EPA Overview
The 8-DIP (0.300, 7.62mm) package offers greater flexibility.There is a package in the form of Tube.Configuration is supported by 1 drivers.Through Hole is the way in which it is mounted.WGate driversh a 4.5V~30V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.The gate type on this device is N-Channel, P-Channel MOSFET.In this device, temperatures must not exceed -40°C~150°C TJ.Inverting is used as the input type.8 terminations constitute its foundation.There are various related parts under its base part number TC4431.The device is mounted with Through Hole.Devices have 8 pins available.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.As a maximum, there is 1.5A limit to the output current.This subcategory of MOSFET Drivers has a number of useful electronic components.The board has 8 component pins.Using 730mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.Keeping the supply current at 4mA ensures greater stability.The power supply 4.5/30V of the product solves the power supply problem for a variety of applications.
TC4431EPA Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC4431EPA Applications
There are a lot of Microchip Technology TC4431EPA gate drivers applications.
- Motor Drives
- DC-DC Converters
- High-speed communications
- Broadcast equipment
- Isolated Gate Driver Supplies
- Line drivers
- UPS systems
- Solar power supplies
- Industrial Motor Inverter - Power Tools, Robotics
- Industrial Modules
