TC4431VPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 12Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~30V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | TC4431 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Voltage | 29V |
| Max Output Current | 1.5A |
| Power Supplies | 4.5/30V |
| Nominal Supply Current | 400μA |
| Power Dissipation | 730mW |
| Output Current | 1.5A |
| Max Supply Current | 4mA |
| Propagation Delay | 90 ns |
| Input Type | Inverting |
| Turn On Delay Time | 90 ns |
| Rise Time | 25ns |
| Fall Time (Typ) | 33 ns |
| Rise / Fall Time (Typ) | 25ns 33ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Input Bias Current | 10μA |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 4.953mm |
| Length | 10.16mm |
| Width | 7.112mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
TC4431VPA Overview
In order to increase flexibility, the package 8-DIP (0.300, 7.62mm) is used.Tube is the packaging method.Gate drivers incorporates wGate driversh 1 drivers for Gate driverss configuration.In the direction of Through Hole, gate drivers is mounted.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.5V~30V.Gate type N-Channel, P-Channel MOSFET is designed for it.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Mosfet driver accepts input of type Inverting.The configuration is based on 8 terminations.Many related parts can be found under its base part number TC4431.Through Hole is the way it takes to mount the device.When the device is designed, it has 8 pins.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.An output current as high as 1.5A can be achieved at maximum power.There are several useful electronic components within its subcategory MOSFET Drivers.There are 8 component pins on the board.The output current of this device can be set to 1.5A.Based on its maximum power dissipation of 730mW, it is clear that it is capable of transferring and conducting power loss without overheating.Keeping the supply current at 4mA ensures greater stability.Using its power supply of 4.5/30V, it provides solutions to diverse power supply problems.As a result, a voltage of 29V is produced.Mosfet gate drivers operates wMosfet gate driversh a resistance of 12Ohm.
TC4431VPA Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
Resistance of 12Ohm
TC4431VPA Applications
There are a lot of Microchip Technology TC4431VPA gate drivers applications.
- Motor controllers
- High frequency line drivers
- Active filtering
- Smart Phones
- Telecom switch mode power supplies
- Solar inverters
- Industrial Modules
- Line drivers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Pulse transformer drivers
