TC4432COA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~30V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4432 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Power Supplies | 4.5/30V |
| Nominal Supply Current | 4mA |
| Power Dissipation | 470mW |
| Max Supply Current | 4mA |
| Propagation Delay | 90 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 90 ns |
| Rise Time | 40ns |
| Fall Time (Typ) | 50 ns |
| Rise / Fall Time (Typ) | 25ns 33ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4432COA713 Overview
There is greater flexibility with the 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) represents the package.The configuration is supported by 1 drivers.There is a mounting bracket in the way of Surface Mount.WGate driversh a 4.5V~30V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.Gate drivers is designed wGate driversh a N-Channel, P-Channel MOSFET gate.In this device, temperatures must not exceed 0°C~150°C TJ.Non-Inverting is the input type used in this program.There are 8 terminations to form the base of its configuration.You will find various related parts under the base part number TC4432.The device is mounted using Surface Mount.During design, it is configured with 8 pins.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.As a maximum, there is 1.5A limit to the output current.There are several useful electronic components within its subcategory MOSFET Drivers.There are 8 component pins on the board.Its maximum power dissipation of 470mW also demonstrates its maximum ability to transfer power without overheating.For higher stability, the supply current should be kept at 4mA.With its power supplies of 4.5/30V, it solves the power supply problems for diverse applications.
TC4432COA713 Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC4432COA713 Applications
There are a lot of Microchip Technology TC4432COA713 gate drivers applications.
- LCD/LCoS/DLP portable and embedded pico projectors
- Isolated Supplies for controller area network (CAN),
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- High power buffers
- UPS systems
- High frequency line drivers
- Video amplifiers
- Commercial and agricultural vehicles (CAV)
- A/D drivers
- RGB applications
