TC4432CPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~30V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC4432 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 1.5A |
| Power Supplies | 4.5/30V |
| Nominal Supply Current | 4mA |
| Power Dissipation | 730mW |
| Max Supply Current | 4mA |
| Propagation Delay | 90 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 90 ns |
| Rise Time | 40ns |
| Fall Time (Typ) | 50 ns |
| Rise / Fall Time (Typ) | 25ns 33ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 4.06mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4432CPA Overview
Gate drivers provides greater flexibilGate driversy to use the 8-DIP (0.300, 7.62mm) package.Tube represents the packaging method.It's mounted on the way to Through Hole.Using a 4.5V~30V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.A gate type of N-Channel, P-Channel MOSFET is used in its design.There is a temperature range for this device of 0°C~150°C TJ.A type of Non-Inverting is used for input in this program.Initially, the configuration is composed of 8 terminations.Many related parts can be found under its base part number TC4432.Devices are mounted by Through Hole.The pins are configured with 8 when designing the chip.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.As a maximum, there is 1.5A limit to the output current.There are various useful electronic components in its subcategory MOSFET Drivers.On the board, there are 8 component pins.Mosfet driver is based on a basis of 1 outputs that have been integrated.Based on its maximum power dissipation of 730mW, it is clear that it is capable of transferring and conducting power loss without overheating.To increase stability, keep the supply current at 4mA.The power supply of 4.5/30V is able to solve the power supply problems for a wide variety of applications.
TC4432CPA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC4432CPA Applications
There are a lot of Microchip Technology TC4432CPA gate drivers applications.
- Solar power supplies
- Isolated Gate Driver Supplies
- Smart Phones
- Power factor correction (PFC) circuits
- Active filtering
- Commercial air-conditioning (CAC)
- Welding
- DC/DC converters
- Industrial Power Supplies
- White Goods - Air Conditioner, Washing Machine,
