TC4432EOA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~30V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4432 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Power Supplies | 4.5/30V |
| Nominal Supply Current | 4mA |
| Power Dissipation | 470mW |
| Max Supply Current | 4mA |
| Propagation Delay | 90 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 90 ns |
| Rise Time | 40ns |
| Fall Time (Typ) | 50 ns |
| Rise / Fall Time (Typ) | 25ns 33ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4432EOA713 Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.The packaging method is indicated by Tape & Reel (TR).Configuration is supported by 1 drivers.The device is mounted in the direction of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~30V supply voltage.This device is designed with a N-Channel, P-Channel MOSFET gate type.This device allows temperatures in the range of -40°C~150°C TJ.This program uses the input type of Non-Inverting.The configuration starts with 8 terminations.Numerous related parts can be found under its base part number TC4432.Surface Mount is the way it takes to mount the device.The pins are configured with 8 when designing the chip.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.There is an output current limit of 1.5A for this device.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.On the board, there are 8 component pins.470mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.As a precaution, make sure the supply current is kept at 4mA.Mosfet gate drivers solves the power supply problems for diverse applications based on Mosfet gate driverss power supplies of 4.5/30V.
TC4432EOA713 Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC4432EOA713 Applications
There are a lot of Microchip Technology TC4432EOA713 gate drivers applications.
- Head-up and Head mounted displays
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Motor controllers
- RGB applications
- LCD/LCoS/DLP portable and embedded pico projectors
- Commercial air-conditioning (CAC)
- Smart Phones
- Line drivers
- Isolated Gate Driver Supplies
- Industrial motor drives - compact, standard, premium, servo drives
