TC4432EPA
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~30V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC4432 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Power Supplies | 4.5/30V |
| Nominal Supply Current | 4mA |
| Power Dissipation | 730mW |
| Max Supply Current | 4mA |
| Propagation Delay | 90 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 90 ns |
| Rise Time | 40ns |
| Fall Time (Typ) | 50 ns |
| Rise / Fall Time (Typ) | 25ns 33ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 4.06mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
TC4432EPA Overview
Its 8-DIP (0.300, 7.62mm) package provides greater flexibility.There is a package in the form of Tube.A total of 1 drivers are integrated into its configuration.Gate drivers is mounted in the way of Through Hole.When the supply voltage is 4.5V~30V it is able to demonstrate its superiority.A gate type of N-Channel, P-Channel MOSFET is used in its design.-40°C~150°C TJ is the allowed temperature range for this device.Mosfet driver uses Non-Inverting as Mosfet drivers input type.Its configuration is based on a total of 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number TC4432.Mosfet driver is mounted using Through Hole.Devices have 8 pins available.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 1.5A.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.The board has a total of 8 component pins.Using 730mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.As a precaution, make sure the supply current is kept at 4mA.Based on its power supplies of 4.5/30V, it solves the problem of power supply failure for a variety of applications.
TC4432EPA Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC4432EPA Applications
There are a lot of Microchip Technology TC4432EPA gate drivers applications.
- Portable Media Players
- Line drivers
- High-speed communications
- DC/DC converters
- serial peripheral interface (SPI), I2C
- High frequency line drivers
- Industrial Motor Inverter - Power Tools, Robotics
- Solar inverters
- Motor Controls
- Video amplifiers
