TC4432VOA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| Resistance | 12Ohm |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~30V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Base Part Number | TC4432 |
| Output Voltage | 29.2V |
| Max Output Current | 1.5A |
| Nominal Supply Current | 400μA |
| Power Dissipation | 470mW |
| Output Current | 1.5A |
| Max Supply Current | 4mA |
| Propagation Delay | 90 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 90 ns |
| Rise Time | 25ns |
| Fall Time (Typ) | 33 ns |
| Rise / Fall Time (Typ) | 25ns 33ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Input Bias Current | 10μA |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 1.42mm |
| Length | 4.9mm |
| Width | 3.91mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
TC4432VOA713 Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) is the form of the package.This configuration includes 1 drivers.In this case, gate drivers is mounted along the way of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~30V supply voltage.Gate drivers is designed wGate driversh a gate type of N-Channel, P-Channel MOSFET.This device allows temperatures in the range of -40°C~150°C TJ.Non-Inverting is the input type used in this program.As a result of its configuration, it contains a maximum of 8 terminations.Under its base part number TC4432, various related parts can be found.Surface Mount is the way it takes to mount the device.When designing, the device is configured with 8 pins.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 1.5A.An output current of 1.5A is supported.470mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.Mosfet gate drivers is recommended that you keep the supply current at 4mA in order to achieve greater stabilMosfet gate driversy.A voltage of 29.2V is output by this device.As far as the resistance is concerned, it works with a resistance of 12Ohm.
TC4432VOA713 Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
Resistance of 12Ohm
TC4432VOA713 Applications
There are a lot of Microchip Technology TC4432VOA713 gate drivers applications.
- Isolated switch mode power supplies (SMPS)
- General Purpose 3-Phase Inverter
- Motor controllers
- Motor Drives
- UPS systems
- Portable computers
- Commercial air-conditioning (CAC)
- Multicolor LED/laser displays
- LCD/LCoS/DLP portable and embedded pico projectors
- 3-Phase Motor Inverter Driver
