TC4432VPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 12Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~30V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | TC4432 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Voltage | 29V |
| Max Output Current | 1.5A |
| Power Supplies | 4.5/30V |
| Nominal Supply Current | 400μA |
| Power Dissipation | 730mW |
| Output Current | 1.5A |
| Max Supply Current | 4mA |
| Propagation Delay | 90 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 90 ns |
| Rise Time | 25ns |
| Fall Time (Typ) | 33 ns |
| Rise / Fall Time (Typ) | 25ns 33ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Input Bias Current | 10μA |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 3.3mm |
| Length | 9.27mm |
| Width | 6.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
TC4432VPA Overview
In order to increase flexibility, the package 8-DIP (0.300, 7.62mm) is used.There is a package in the form of Tube.A total of 1 drivers are integrated into its configuration.There is a mounting bracket in the way of Through Hole.A supply voltage of 4.5V~30V demonstrates its superiority.A gate type of N-Channel, P-Channel MOSFET is used in its design.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.This program uses the input type of Non-Inverting.Its configuration is based on a total of 8 terminations.Numerous related parts can be found under its base part number TC4432.Devices are mounted by Through Hole.When the device is designed, it has 8 pins.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.Mosfet driver is possible to achieve a maximum output current of 1.5A.Several electronic components are included in its subcategory of MOSFET Drivers.The board has a total of 8 component pins.The output current of this device can be set to 1.5A.Using 730mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.Mosfet gate drivers is recommended that you keep the supply current at 4mA in order to achieve greater stabilMosfet gate driversy.The power supply of 4.5/30V is able to solve the power supply problems for a wide variety of applications.Mosfet gate drivers produces a voltage of 29V.This device requires a resistance value of 12Ohm.
TC4432VPA Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
Resistance of 12Ohm
TC4432VPA Applications
There are a lot of Microchip Technology TC4432VPA gate drivers applications.
- Topologies
- High-voltage isolated DC-DC converters
- Portable Navigation Devices
- Industrial Modules
- Digitally controlled power supplies
- High-speed communications
- Smart Phones
- AC-DC Inverters
- RGB applications
- Isolated Gate Driver Supplies
