TC4452VOA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4452 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 17.975V |
| Max Output Current | 13A |
| Nominal Supply Current | 200μA |
| Output Current | 12A |
| Max Supply Current | 200μA |
| Propagation Delay | 52 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 52 ns |
| Rise Time | 40ns |
| Fall Time (Typ) | 40 ns |
| Rise / Fall Time (Typ) | 30ns 32ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Input Bias Current | 10μA |
| Output Peak Current Limit-Nom | 13A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 13A 13A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 1.42mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4452VOA Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.Tube represents the packaging method.Ideally, it should be mounted in the direction of Surface Mount.In the absence of a 4.5V~18V supply voltage, its superiority can be demonstrated.This gate type has a IGBT, N-Channel, P-Channel MOSFET design.-40°C~150°C TJ is the allowed temperature range for this device.Mosfet driver accepts input of type Non-Inverting.The configuration starts with 8 terminations.Numerous related parts can be found under its base part number TC4452.You mount it with Surface Mount.There are 8 pins available in the device.A supply voltage of 5V is required for operation.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.There is a maximum output current of 13A that can be achieved.Several electronic components are included in its subcategory of MOSFET Drivers.A board with 8 component pins is available.The basis has 1 integrated outputs.An output current of 12A is supported.To ensure high stability, the supply current should be kept at 200μA.A voltage of 17.975V is output by this device.
TC4452VOA Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
TC4452VOA Applications
There are a lot of Microchip Technology TC4452VOA gate drivers applications.
- Digitally controlled power supplies
- AC-DC Inverters
- High-speed communications
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Head-up and Head mounted displays
- UPS systems
- Automotive Applications
- Line drivers
- Power factor correction (PFC) circuits
- Solar inverters
