TC4452VPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC4452 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 18V |
| Max Output Current | 13A |
| Nominal Supply Current | 200μA |
| Output Current | 12A |
| Max Supply Current | 200μA |
| Propagation Delay | 52 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 52 ns |
| Rise Time | 40ns |
| Fall Time (Typ) | 40 ns |
| Rise / Fall Time (Typ) | 30ns 32ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Output Peak Current Limit-Nom | 13A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 13A 13A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4452VPA Overview
In order to increase flexibility, the package 8-DIP (0.300, 7.62mm) is used.A packaging method of Tube is used.Through Hole is mounted in the way.Using a 4.5V~18V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.IGBT, N-Channel, P-Channel MOSFET is the gate type used for this design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.The input type for this program is Non-Inverting.Mosfet driver is based on 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number TC4452.Mounting the device requires Through Hole.During design, it is configured with 8 pins.Specification is for 5V supply voltage operation.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.The maximum output current can amount to 13A.This subcategory of MOSFET Drivers has a number of useful electronic components.A total of 8 pins are available for component connections.For its basis, 1 outputs are integrated.This device is capable of delivering 12A current.As a precaution, make sure the supply current is kept at 200μA.In this case, it produces a voltage of 18V.
TC4452VPA Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
TC4452VPA Applications
There are a lot of Microchip Technology TC4452VPA gate drivers applications.
- High current laser/LED systems
- Isolated Gate Driver Supplies
- Dual-Battery Systems
- Motor Controls
- High-voltage isolated DC-DC converters
- High-speed communications
- Solar power supplies
- PCMCIA applications
- Digitally controlled power supplies
- Isolated Supplies for controller area network (CAN),
