TC4467COE713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 760mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4467 |
| Pin Count | 16 |
| Max Output Current | 1.2A |
| Nominal Supply Current | 4mA |
| Power Dissipation | 760mW |
| Max Supply Current | 4mA |
| Propagation Delay | 75 ns |
| Input Type | Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 15ns 15ns |
| Interface IC Type | NAND GATE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 4 |
| Turn On Time | 0.1 μs |
| Output Peak Current Limit-Nom | 1.2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.2A 1.2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.1 μs |
| Length | 10.295mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4467COE713 Overview
Its 16-SOIC (0.295, 7.50mm Width) package is adopted for higher flexibility.The packaging method is indicated by Tape & Reel (TR).For its configuration, it incorporates 4 drivers.It's mounted on the way to Surface Mount.A supply voltage of 4.5V~18V demonstrates its superiority.There is a gate type of N-Channel, P-Channel MOSFET in this design.This device is allowed to operate in a temperature range of 0°C~150°C TJ.A type of Inverting is used for input in this program.The configuration starts with 16 terminations.Many related parts can be found under its base part number TC4467.Surface Mount is the way it takes to mount the device.At the time of design, it is configured with 16 pins.As its interface IC, NAND GATE BASED MOSFET DRIVER is being employed.There is a maximum output current of 1.2A that can be achieved.Several electronic components are included in its subcategory of MOSFET Drivers.The number of component pins is 16.Using 760mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.To increase stability, keep the supply current at 4mA.
TC4467COE713 Features
Embedded in the Tape & Reel (TR) package
4 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
16 pins
Maximum power dissipation of 760mW
TC4467COE713 Applications
There are a lot of Microchip Technology TC4467COE713 gate drivers applications.
- Solar inverters
- Video amplifiers
- 3-Phase Motor Inverter Driver
- Isolated Gate Driver Supplies
- Telecom switch mode power supplies
- Solar power supplies
- Pulse transformer drivers
- Isolated Supplies for controller area network (CAN),
- Active Clamp Flyback or Forward and Synchronous Rectifier
- RGB applications
