TC4468CPD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 30Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Base Part Number | TC4468 |
| Pin Count | 8 |
| Number of Outputs | 4 |
| Output Voltage | 18V |
| Max Output Current | 1.2A |
| Nominal Supply Current | 4mA |
| Power Dissipation | 800mW |
| Output Current | 1.2A |
| Max Supply Current | 4mA |
| Propagation Delay | 75 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 15ns 15ns |
| Interface IC Type | AND GATE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Input Bias Current | 10μA |
| Turn On Time | 0.1 μs |
| Output Peak Current Limit-Nom | 1.2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.2A 1.2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.1 μs |
| Height | 3.683mm |
| Length | 19.2786mm |
| Width | 6.604mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4468CPD Overview
Its 14-DIP (0.300, 7.62mm) package is adopted for higher flexibility.A package of Tube has been used.The device is mounted in the direction of Through Hole.By using 4.5V~18V supply voltage, it is able to demonstrate its superiority.This gate type has a N-Channel, P-Channel MOSFET design.Temperature range 0°C~150°C TJ is allowed for this device.The input type for this program is Non-Inverting.Mosfet driver consists of 14 terminations as Mosfet drivers foundation.Mosfet driver is possible to find various related parts under Mosfet drivers base part number TC4468.In this case, Through Hole indicates how the device is to be mounted.When designing, the device is configured with 14 pins.As its interface IC, AND GATE BASED MOSFET DRIVER is being employed.In the maximum case, the output current can be limited to 1.2A.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.The board contains 8 pins for component connections.The basis has 4 integrated outputs.Mosfet driver supports an output current of 1.2A.Considering its maximum power dissipation, 800mW shows its maximum capacity to transfer and conduct power loss without overheating.As a precaution, make sure the supply current is kept at 4mA.In this case, it outputs 18V voltage.With a resistance of 30Ohm, it operates.
TC4468CPD Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
14 pins
Maximum power dissipation of 800mW
Resistance of 30Ohm
TC4468CPD Applications
There are a lot of Microchip Technology TC4468CPD gate drivers applications.
- Industrial Modules
- Telecom switch mode power supplies
- PCMCIA applications
- High-voltage isolated DC-DC converters
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Portable Navigation Devices
- AC-DC Inverters
- Isolated switch mode power supplies (SMPS)
- Multicolor LED/laser displays
- Isolated Gate Driver Supplies
