TC4469CPD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 30Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Base Part Number | TC4469 |
| Pin Count | 14 |
| Number of Outputs | 4 |
| Output Voltage | 18V |
| Max Output Current | 1.2A |
| Nominal Supply Current | 4mA |
| Power Dissipation | 800mW |
| Output Current | 1.2A |
| Max Supply Current | 4mA |
| Propagation Delay | 75 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 15ns 15ns |
| Interface IC Type | AND GATE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Input Bias Current | 10μA |
| Turn On Time | 0.1 μs |
| Output Peak Current Limit-Nom | 1.2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.2A 1.2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.1 μs |
| Height | 3.683mm |
| Length | 19.2786mm |
| Width | 6.604mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4469CPD Overview
Its 14-DIP (0.300, 7.62mm) package is adopted for higher flexibility.Tube is the form of the package.Gate drivers is mounted in the way of Through Hole.In the absence of a 4.5V~18V supply voltage, its superiority can be demonstrated.A gate type of N-Channel, P-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of 0°C~150°C TJ.The input type for this program is Inverting, Non-Inverting.It's configured with 14 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number TC4469.You mount it with Through Hole.Mosfet driver is configured wMosfet driverh 14 pins when designing.Mosfet driver utilizes the interface IC AND GATE BASED MOSFET DRIVER.An output current as high as 1.2A can be achieved at maximum power.There are various useful electronic components in its subcategory MOSFET Drivers.The board has a total of 14 component pins.Based on its basis, it integrates 4 outputs.The output current of this device can be set to 1.2A.This device has a maximum power dissipation of 800mW, indicating that it is capable of reducing power loss without overheating.To maintain higher stability, the supply current should always be 4mA.As a result, a voltage of 18V is produced.The system operates at a resistance of 30Ohm.
TC4469CPD Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
14 pins
Maximum power dissipation of 800mW
Resistance of 30Ohm
TC4469CPD Applications
There are a lot of Microchip Technology TC4469CPD gate drivers applications.
- Line drivers
- Solar inverters
- Isolated Gate Driver Supplies
- serial peripheral interface (SPI), I2C
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Head-up and Head mounted displays
- Digitally controlled power supplies
- 3-Phase Motor Inverter Driver
- Industrial motor drives - compact, standard, premium, servo drives
- Topologies
