TC4626COE713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 760mW |
| Technology | CMOS |
| Voltage - Supply | 4V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4626 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Max Output Current | 1.5A |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 760mW |
| Max Supply Current | 2.5mA |
| Propagation Delay | 55 ns |
| Input Type | Inverting |
| Turn On Delay Time | 55 ns |
| Rise Time | 40ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 33ns 27ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.06 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.07 μs |
| Height Seated (Max) | 2.64mm |
| Width | 7.495mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4626COE713 Overview
The 16-SOIC (0.295, 7.50mm Width) package provides greater flexibility.A packaging method of Tape & Reel (TR) is used.Gate drivers incorporates wGate driversh 1 drivers for Gate driverss configuration.It's mounted on the way to Surface Mount.In the absence of a power supply voltage of 4V~6V V, it is able to demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET is designed for it.This device is allowed to operate in a temperature range of 0°C~70°C TA.Inverting is used as the input type in this program.Its configuration is based on a total of 16 terminations.You will find various related parts under the base part number TC4626.The mount method is Surface Mount.At the time of design, it is configured with 16 pins.This device operates with 5V supply voltage.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible for the output current to be as low as 1.5A.The board has a total of 16 component pins.Its maximum power dissipation of 760mW also demonstrates its maximum ability to transfer power without overheating.The supply current should be kept at 2.5mA to ensure higher stability.The frequency of 1MHz can improve efficiency.
TC4626COE713 Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
16 pins
Maximum power dissipation of 760mW
TC4626COE713 Applications
There are a lot of Microchip Technology TC4626COE713 gate drivers applications.
- LCD/LCoS/DLP portable and embedded pico projectors
- AC-DC Inverters
- serial peripheral interface (SPI), I2C
- Isolated Supplies for controller area network (CAN),
- Portable Media Players
- Telecom switch mode power supplies
- Industrial Motor Inverter - Power Tools, Robotics
- Topologies
- Smart Phones
- Broadcast equipment
