TC4626EPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4V~6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Base Part Number | TC4626 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Power Supplies | 5V |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 730mW |
| Max Supply Current | 2.5mA |
| Propagation Delay | 55 ns |
| Input Type | Inverting |
| Turn On Delay Time | 55 ns |
| Rise Time | 40ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 33ns 27ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.06 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.07 μs |
| Length | 9.5mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4626EPA Overview
Its 8-DIP (0.300, 7.62mm) package is adopted for higher flexibility.Tube is the packaging method.There are 1 drivers installed for this device.In the direction of Through Hole, gate drivers is mounted.In the absence of a 4V~6V supply voltage, its superiority can be demonstrated.The gate type on this device is N-Channel, P-Channel MOSFET.Mosfet driver is possible to use this device at temperatures as low as -40°C~85°C TA.Mosfet driver uses Inverting as Mosfet drivers input type.8 terminations constitute its foundation.Numerous related parts can be found under its base part number TC4626.Mosfet driver is mounted using Through Hole.In the device, there are 8 pins.With a supply voltage of 5V, it is designed to operate.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 1.5A.Within this subcategory of MOSFET Drivers, there are several useful electronic components.On the board, there are 8 component pins.Its maximum power dissipation of 730mW also demonstrates its maximum ability to transfer power without overheating.To maintain higher stability, the supply current should always be 2.5mA.With its 5V power supply, it provides power for diverse applications.The frequency of 1MHz can improve efficiency.
TC4626EPA Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC4626EPA Applications
There are a lot of Microchip Technology TC4626EPA gate drivers applications.
- DC-DC Converters
- Motor Controls
- Motor controllers
- High current laser/LED systems
- Digitally controlled power supplies
- serial peripheral interface (SPI), I2C
- Active filtering
- LCD/LCoS/DLP portable and embedded pico projectors
- Isolated switch mode power supplies (SMPS)
- Line drivers
