Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.295, 7.50mm Width) |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
2002 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
MOSFET Drivers |
Max Power Dissipation |
760mW |
Technology |
CMOS |
Voltage - Supply |
4V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Frequency |
1MHz |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
TC4627 |
Pin Count |
16 |
Number of Outputs |
1 |
Max Output Current |
1.5A |
Power Supplies |
5V |
Nominal Supply Current |
2.5mA |
Power Dissipation |
760mW |
Max Supply Current |
2.5mA |
Propagation Delay |
55 ns |
Input Type |
Non-Inverting |
Turn On Delay Time |
55 ns |
Rise Time |
40ns |
Fall Time (Typ) |
35 ns |
Rise / Fall Time (Typ) |
33ns 27ns |
Interface IC Type |
BUFFER OR INVERTER BASED MOSFET DRIVER |
Channel Type |
Single |
Turn On Time |
0.06 μs |
Output Peak Current Limit-Nom |
1.5A |
Driven Configuration |
High-Side or Low-Side |
Gate Type |
N-Channel, P-Channel MOSFET |
Current - Peak Output (Source, Sink) |
1.5A 1.5A |
High Side Driver |
YES |
Logic Voltage - VIL, VIH |
0.8V 2.4V |
Turn Off Time |
0.07 μs |
Height Seated (Max) |
2.64mm |
Width |
7.495mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TC4627COE Overview
Its 16-SOIC (0.295, 7.50mm Width) package provides greater flexibility.Tube represents the packaging method.Gate drivers is mounted in the way of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4V~6V.Gate type N-Channel, P-Channel MOSFET is designed for it.For this device, the temperature range is 0°C~70°C TA.The input type is Non-Inverting.The configuration is based on 16 terminations.Many related parts can be found under its base part number TC4627.Mounting the device requires Surface Mount.Mosfet driver is configured wMosfet driverh 16 pins when designing.A voltage of 5V is required for its operation.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.The maximum output current can amount to 1.5A.There are several useful electronic components within its subcategory MOSFET Drivers.16 pins are present on the component.Based on its basis, it integrates 1 outputs.The maximum power dissipation of 760mW shows its maximum capability to transfer and conduct power loss without overheating.Mosfet gate drivers is recommended to keep the supply current at 2.5mA to ensure greater stabilMosfet gate driversy.Based on its power supplies of 5V, it solves the problem of power supply failure for a variety of applications.The frequency of 1MHz can be used to improve efficiency.
TC4627COE Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
16 pins
Maximum power dissipation of 760mW
TC4627COE Applications
There are a lot of Microchip Technology TC4627COE gate drivers applications.
- RGB applications
- Pulse transformer drivers
- High power buffers
- High current laser/LED systems
- Isolated Gate Driver Supplies
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Topologies
- Motor Control
- Industrial motor drives - compact, standard, premium, servo drives
- DC/DC converters