TC4627CPA
| Parameters | |
|---|---|
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4V~6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Base Part Number | TC4627 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 1.5A |
| Power Supplies | 5V |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 730mW |
| Max Supply Current | 2.5mA |
| Propagation Delay | 55 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 55 ns |
| Rise Time | 40ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 33ns 27ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.06 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.07 μs |
| Length | 9.5mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
TC4627CPA Overview
A higher level of flexibility is provided by its 8-DIP (0.300, 7.62mm) package.Tube represents the packaging method.In this case, gate drivers is mounted along the way of Through Hole.In the absence of a 4V~6V supply voltage, its superiority can be demonstrated.Gate type N-Channel, P-Channel MOSFET has been used in its design.In this device, temperatures must not exceed 0°C~70°C TA.Mosfet driver uses Non-Inverting as Mosfet drivers input type.The configuration is based on 8 terminations.The base part number TC4627 refers to a number of related parts.In this case, Through Hole indicates how the device is to be mounted.At the time of design, it is configured with 8 pins.In order to operate, a voltage of 5V has to be applied.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.Mosfet driver is possible to achieve a maximum output current of 1.5A.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.Components with 8 pins are available.The basis of this system consists of 1 outputs.Considering its maximum power dissipation, 730mW shows its maximum capacity to transfer and conduct power loss without overheating.The supply current should be kept at 2.5mA to ensure higher stability.Mosfet gate drivers solves the power supply problems for diverse applications based on Mosfet gate driverss power supplies of 5V.Improved efficiency can be obtained based on the frequency of 1MHz.
TC4627CPA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC4627CPA Applications
There are a lot of Microchip Technology TC4627CPA gate drivers applications.
- High power buffers
- High frequency line drivers
- High-voltage isolated DC-DC converters
- LCD/LCoS/DLP portable and embedded pico projectors
- Active Clamp Flyback or Forward and Synchronous Rectifier
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Multicolor LED/laser displays
- Isolated switch mode power supplies (SMPS)
- Active filtering
- Video amplifiers
