TC4627EOE713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 760mW |
| Technology | CMOS |
| Voltage - Supply | 4V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4627 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Max Output Current | 1.5A |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 760mW |
| Max Supply Current | 2.5mA |
| Propagation Delay | 55 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 55 ns |
| Rise Time | 40ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 33ns 27ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.06 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.07 μs |
| Height Seated (Max) | 2.64mm |
| Width | 7.495mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4627EOE713 Overview
The 16-SOIC (0.295, 7.50mm Width) package offers greater flexibility.Tape & Reel (TR) is the packaging method.Configuration is based on 1 drivers.In the direction of Surface Mount, gate drivers is mounted.A supply voltage of 4V~6V demonstrates its superiority.This gate type has a N-Channel, P-Channel MOSFET design.Mosfet driver is possible to use this device at temperatures as low as -40°C~85°C TA.Non-Inverting is used as the input type in this program.Initially, the configuration is composed of 16 terminations.There are various parts that can be found under its base part number TC4627.The device is mounted with Surface Mount.When designing, the device is configured with 16 pins.A voltage of 5V is required for its operation.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.The maximum output current can amount to 1.5A.The board contains 16 pins for component connections.Using 760mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.For higher stability, the supply current should be kept at 2.5mA.The frequency of 1MHz can improve efficiency.
TC4627EOE713 Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
16 pins
Maximum power dissipation of 760mW
TC4627EOE713 Applications
There are a lot of Microchip Technology TC4627EOE713 gate drivers applications.
- Industrial Power Supplies
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Commercial and agricultural vehicles (CAV)
- DC-DC Converters
- A/D drivers
- Portable Media Players
- Refrigerator
- Motor controllers
- Active filtering
- Automotive Applications
