TC51N2702ECBTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Tolerance | 2% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 240mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC51N2 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Output Type | Voltage |
| Max Output Current | 50mA |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 700mV |
| Operating Supply Current | 4.2μA |
| Power Dissipation | 240mW |
| Adjustable Threshold | NO |
| Quiescent Current | 2μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.7V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 50ms Minimum |
| Min Reset Threshold Voltage | 2.646V |
| Max Reset Threshold Voltage | 2.754V |
| Undervoltage Threshold | 2.646V |
| Overvoltage Threshold | 2.754V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC51N2702ECBTR Overview
There are 3 terminals on this power management that allow it to be mounted. Power management is packaged in a Tape & Reel (TR) way. Power management is possible to find a series of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. To assist you, this PMIC includes TO-236-3, SC-59, SOT-23-3 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. Manage ics operate at 1V supply voltages. Power ics operate at 1 supply voltages. Using Surface Mount, IC management is mounted. 3 pins are present in total in this power management. There are 3 pins on the supervisor. It is recommended that Vsup should not be less than 700mV for this IC power. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. The supply current of the power management is 4.2μA. It is always advisable to use TC51N2, the base supervisor number, when searching for similar PMICs from the manufacturer. Measurement and testing should be noted for this IC management's nominal tolerance of 2%.
TC51N2702ECBTR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
4.2μA operating supply current
TC51N2702ECBTR Applications
There are a lot of Microchip Technology TC51N2702ECBTR Voltage Supervisors applications.
- Telecommunications equipment
- Automotive permanent magnet synchronous motors
- Fire equipment power monitoring system
- Analog circuit
- Leakage protection
- Sensitive sensors
- Electrical fire monitoring system
- Leakage current detection
- Smart meter
- Power distribution systems of CCU
