TC51N3002ECBTR
| Parameters | |
|---|---|
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 240mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC51N3 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 700mV |
| Operating Supply Current | 4.2μA |
| Power Dissipation | 240mW |
| Adjustable Threshold | NO |
| Quiescent Current | 2μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 50ms Minimum |
| Min Reset Threshold Voltage | 2.94V |
| Max Reset Threshold Voltage | 3.06V |
| Undervoltage Threshold | 2.94V |
| Overvoltage Threshold | 3.06V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
TC51N3002ECBTR Overview
As you can see, this power management is mounted through 3 terminals. This power ic is packaged in a way that looks like a Tape & Reel (TR). To assist you, this IC power includes 1 functions. On this supervisor, there is a series of 1 channels that can be found. For your reference, this PMIC includes a list of TO-236-3, SC-59, SOT-23-3 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. There is a specification for the peak reflow temperature of the package to be 260. In a 1V supply voltage, the power management conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Power management is included in the Surface Mount mount. 3 pins are present in total in this power management. There are 3 pins on the power managment ic. There should be a minimum voltage supply (Vsup) of 700mV for this PMIC. During this IC power, the maximum supply voltage (Vsup) should not exceed 10V volts. Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. Supplied with a operating current of 4.2μA, this PMIC is capable of fully function as specified. It is always advisable to use TC51N3, the base supervisor number, when searching for similar PMICs from the manufacturer.
TC51N3002ECBTR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
4.2μA operating supply current
TC51N3002ECBTR Applications
There are a lot of Microchip Technology TC51N3002ECBTR Voltage Supervisors applications.
- Refrigeration
- Power distribution systems of operating room
- Important electronics for automotive protection
- Linux and server computing
- Important electronics for automotive safety
- Power distribution systems of ICU
- Microprocessor system
- Medical-specific insulation monitor
- Battery cars
- emergency room
