Parameters |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
240mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
TC53C2902 |
Output |
Push-Pull, Totem Pole |
Pin Count |
5 |
Number of Channels |
1 |
Max Supply Voltage |
10V |
Min Supply Voltage |
1.5V |
Operating Supply Current |
4.2μA |
Max Supply Current |
4.2μA |
Adjustable Threshold |
NO |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
2.9V |
Number of Voltages Monitored |
1 |
Reset Timeout |
200μs Maximum |
Min Reset Threshold Voltage |
2.842V |
Max Reset Threshold Voltage |
2.958V |
Threshold Voltage |
+2.9V |
Undervoltage Threshold |
2.842V |
Overvoltage Threshold |
2.958V |
Length |
2.9mm |
RoHS Status |
ROHS3 Compliant |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2002 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
TC53C2902ECTTR Overview
This power management consists of 5 mounting terminals on which it can be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. To assist you, this IC power includes 1 functions. On this supervisor, there is a series of 1 channels that can be found. To assist you, this PMIC includes SC-74A, SOT-753 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. Manage ics operate at 2V supply voltages. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. Power Management Circuits is a subcategory of this PMIC chip. It has a total of 5 pins that are attached to IC management. This power management has 5 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.5V, which is the minimum supply voltage that should be applied. There should be no more than 10V volts of maximum supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. There is a 4.2μA supply current present in the power management. You can always use TC53C2902, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature is 4.2μA.
TC53C2902ECTTR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.5V
4.2μA operating supply current
TC53C2902ECTTR Applications
There are a lot of Microchip Technology TC53C2902ECTTR Voltage Supervisors applications.
- Telecommunications equipment
- WiFi router
- Utility meter
- Consumer electronics
- Efficient information transmission
- Solar power charger
- Low voltage/high power - AI, GPU
- Detection of phase loss
- Transformer load monitoring equipment
- Radar