TC53N2902ECTTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | MATTE TIN |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 240mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC53N2902 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 1.5V |
| Operating Supply Current | 4.2μA |
| Power Dissipation | 240mW |
| Max Supply Current | 4.2μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.9V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 200μs Maximum |
| Min Reset Threshold Voltage | 2.842V |
| Max Reset Threshold Voltage | 2.958V |
| Threshold Voltage | +2.9V |
| Undervoltage Threshold | 2.842V |
| Overvoltage Threshold | 2.958V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC53N2902ECTTR Overview
Power management is mounted through 5 terminals. This power ic is packaged in a way that looks like a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 1 channels. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. There is a voltage supply of 2V for the PMIC chip, and the chip conducts at that voltage. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount mounts power management on the wall. There is a subcategory called Power Management Circuits for this power management. In total, IC powers are 5 pins on the board. The pins of the power management system count 5. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.5V. Voltage (Vsup) shouldn't exceed 10V volts in this PMIC. A Surface Mount mounting type is recommended. You should set the supervisor's temperature during -40°C~85°C TA . Power management has an output of Open Drain or Open Collector during operation. It is estimated that the voltage supervisor's supply current is 4.2μA. A similar IC managements number of the manufacturer can always be found by using TC53N2902, the base power ics number. At the most, voltage supervisor can work with a supply temperature of 4.2μA.
TC53N2902ECTTR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.5V
4.2μA operating supply current
TC53N2902ECTTR Applications
There are a lot of Microchip Technology TC53N2902ECTTR Voltage Supervisors applications.
- DC stabilized power supply module
- Detection of phase loss
- Multi-voltage system
- Battery-powered equipment
- Detection of phase sequence
- Satellite navigation
- External alarm
- Microprocessor system
- Battery cars
- Electric heating appliances
