TC54VC1402EZB
| Parameters | |
|---|---|
| Power Dissipation | 300mW |
| Adjustable Threshold | NO |
| Quiescent Current | 1.1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.4V |
| Number of Voltages Monitored | 1 |
| Supply Current-Max (Isup) | 0.004mA |
| Min Reset Threshold Voltage | 1.37V |
| Max Reset Threshold Voltage | 1.43V |
| Threshold Voltage | +1.4V |
| Undervoltage Threshold | 1.37V |
| Overvoltage Threshold | 1.43V |
| Height | 5.334mm |
| Length | 5.21mm |
| Width | 4.191mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2006 |
| Tolerance | 2% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 300mW |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Number of Functions | 1 |
| Supply Voltage | 2.1V |
| Base Part Number | TC54VC1402 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Output Type | Voltage |
| Max Output Current | 50mA |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 700mV |
| Operating Supply Current | 3.6μA |
TC54VC1402EZB Overview
Power management is mounted through 3 terminals. Power management is packaged in a Bulk way. In this PMIC, you can find 1 functions for your reference. There are 1 channels on this power managment ic that can be found in a series. In this IC management you will find TO-226-3, TO-92-3 (TO-226AA) functions for you to refer to. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. There is a voltage supply of 2.1V for the PMIC chip, and the chip conducts at that voltage. IC management conducts in a 1-voltage supply. The power management is mounted by a Through Hole-axis. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, the power management has 3 pins in it. 3 pins are on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 700mV volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. Through Hole is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. There is a supply current of 3.6μA for the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to TC54VC1402, which is the base power ics number. When measuring and testing the IC power, it is important to pay attention to the nominal tolerance 2%.
TC54VC1402EZB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.6μA operating supply current
TC54VC1402EZB Applications
There are a lot of Microchip Technology TC54VC1402EZB Voltage Supervisors applications.
- Consumer electronics
- Data storage applications
- Digitally controlled LDO regulators circuit
- Detection of phase sequence
- Microprocessor system
- Efficient information transmission
- DVR
- Network equipment
- Electric heating appliances
- DSP
