TC54VC2102EMB713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-243AA |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | SINGLE |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC54VC2102 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 700mV |
| Operating Supply Current | 3.6μA |
| Power Dissipation | 500mW |
| Adjustable Threshold | NO |
| Quiescent Current | 1.1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.1V |
| Number of Voltages Monitored | 1 |
| Supply Current-Max (Isup) | 0.004mA |
| Min Reset Threshold Voltage | 2.06V |
| Max Reset Threshold Voltage | 2.14V |
| Threshold Voltage | +2.1V |
| Undervoltage Threshold | 2.06V |
| Overvoltage Threshold | 2.14V |
| Length | 4.495mm |
| Width | 2.445mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC54VC2102EMB713 Overview
As you can see, this power management is mounted through 3 terminals. It is packaged with Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. IC management is packaged as a TO-243AA package. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts in a 2V-voltage supply. When a supply voltage of 1 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. There is a subcategory called Power Management Circuits for this power management. The total number of pins on this power management is 3. There are 3 pins on the power managment ic. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 700mV, which is the minimum supply voltage that should be applied. This IC power should be powered by no more than 10V volts of supply voltage (Vsup). Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. For this power management, there is an 3.6μA volt supply current. To find similar IC managements from the manufacturer, you can always search by TC54VC2102.
TC54VC2102EMB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.6μA operating supply current
TC54VC2102EMB713 Applications
There are a lot of Microchip Technology TC54VC2102EMB713 Voltage Supervisors applications.
- Battery cars
- Functional modules
- Power distribution systems of infant care room
- Stable power system
- Important electronics for automotive protection
- DC stabilized power supply module
- Telecommunications equipment
- Dash board
- Detection of phase sequence
- Medical-specific isolation transformer
