TC54VC2102EZB
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2011 |
| Tolerance | 2% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 300mW |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Number of Functions | 1 |
| Supply Voltage | 2.1V |
| Base Part Number | TC54VC2102 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Output Type | Voltage |
| Max Output Current | 50mA |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 700mV |
| Operating Supply Current | 3.6μA |
| Nominal Supply Current | 1.1μA |
| Power Dissipation | 300mW |
| Adjustable Threshold | NO |
| Quiescent Current | 1.1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.1V |
| Number of Voltages Monitored | 1 |
| Supply Current-Max (Isup) | 0.004mA |
| Min Reset Threshold Voltage | 2.06V |
| Max Reset Threshold Voltage | 2.14V |
| Threshold Voltage | +2.1V |
| Undervoltage Threshold | 2.06V |
| Overvoltage Threshold | 2.14V |
| Height | 5.334mm |
| Length | 5.21mm |
| Width | 4.191mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC54VC2102EZB Overview
Power management is mounted through 3 terminals. Packaging is in the form of a Bulk. The purpose of this IC management is to provide you with a reference of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. As a reference, this IC power includes TO-226-3, TO-92-3 (TO-226AA) functions for your convenience. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. IC management conducts in a 2.1V-voltage supply. IC management is possible to find a succession of 1 voltages that have been checked. Using Through Hole, IC management is mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, it has 3 pins on IC management. This power management has 3 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 700mV volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. Power management' mounting is recommended to be done with the Through Hole type of mounting. This range of temperature should be set for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. There is a supply current of 3.6μA for the power management. It is always advisable to use TC54VC2102, the base supervisor number, when searching for similar PMICs from the manufacturer. Measurement and testing should take into account the 2% nominal tolerance.
TC54VC2102EZB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.6μA operating supply current
TC54VC2102EZB Applications
There are a lot of Microchip Technology TC54VC2102EZB Voltage Supervisors applications.
- Computer applications
- Digitally controlled LDO regulators circuit
- Personal computers
- Transformer load monitoring equipment
- Battery cars
- Cloud computing
- Analog circuit
- Important electronics for automotive protection
- Sensitive sensors
- Stable power system
