TC54VC2602ECB713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 240mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.1V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC54VC2602 |
| Output | Push-Pull, Totem Pole |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 700mV |
| Power Dissipation | 240mW |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.6V |
| Number of Voltages Monitored | 1 |
| Supply Current-Max (Isup) | 0.004mA |
| Min Reset Threshold Voltage | 2.548V |
| Max Reset Threshold Voltage | 2.652V |
| Threshold Voltage | +2.6V |
| Undervoltage Threshold | 2.548V |
| Overvoltage Threshold | 2.652V |
| Length | 2.92mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
TC54VC2602ECB713 Overview
There are 3 terminals connected to this power management, which makes it easy to mount. This power ic is packaged in a way that looks like a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of TO-236-3, SC-59, SOT-23-3 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 2.1V. A supply voltage of 1 is used to conduct the PMIC chip. The mount is attached to Surface Mount. The power management belongs to the Power Management Circuits subcategory. This power management system has 3 pins. IC management can only work with a supply voltage of 700mV volts. There should be no more than 10V volts of maximum supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. For similar manage ics search of the manufacturer, you can always refer to TC54VC2602, the base PMIC number.
TC54VC2602ECB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
TC54VC2602ECB713 Applications
There are a lot of Microchip Technology TC54VC2602ECB713 Voltage Supervisors applications.
- Fire equipment power monitoring system
- External alarm
- Satellite navigation
- Important electronics for automotive protection
- Magnetic resonance imaging
- Computer applications
- emergency room
- Medical-specific insulation monitor
- Leakage current detection
- Detection of phase imbalance
