TC54VC2602EMB713
| Parameters | |
|---|---|
| Base Part Number | TC54VC2602 |
| Output | Push-Pull, Totem Pole |
| JESD-30 Code | R-PSSO-F3 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 700mV |
| Power Dissipation | 500mW |
| Adjustable Threshold | NO |
| Quiescent Current | 1.1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.6V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 2.548V |
| Max Reset Threshold Voltage | 2.652V |
| Threshold Voltage | +2.6V |
| Undervoltage Threshold | 2.548V |
| Overvoltage Threshold | 2.652V |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-243AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | SINGLE |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.1V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
TC54VC2602EMB713 Overview
Power management is mounted through 3 terminals. A Tape & Reel (TR) package is used to package the power management. In this PMIC, you can find 1 functions for your reference. Power management consists of 1 channels, each of which can be used independently. In this PMIC, you can find TO-243AA functions for your reference. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts at a voltage of 2.1V. When 1 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. It is possible to subcategorize this power ic as a Power Management Circuits chip. 4 pins are present on the power management system. IC management can only work with a supply voltage of 700mV volts. This IC power should be powered by no more than 10V volts of supply voltage (Vsup). Surface Mount mounting is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. It is always advisable to use TC54VC2602, the base supervisor number, when searching for similar PMICs from the manufacturer.
TC54VC2602EMB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
TC54VC2602EMB713 Applications
There are a lot of Microchip Technology TC54VC2602EMB713 Voltage Supervisors applications.
- Display equipment
- Refrigeration
- Personal computers
- Battery cars
- DVR
- DSP
- Telecommunications equipment
- Analog circuit
- Power distribution systems of CCU
- Automotive permanent magnet synchronous motors
