TC54VC2702ECB713
| Parameters | |
|---|---|
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Tolerance | 2% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 240mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC54VC2702 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Output Type | Voltage |
| Max Output Current | 50mA |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 700mV |
| Operating Supply Current | 3.6μA |
| Power Dissipation | 240mW |
| Adjustable Threshold | NO |
| Quiescent Current | 1.1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.7V |
| Number of Voltages Monitored | 1 |
| Supply Current-Max (Isup) | 0.004mA |
| Min Reset Threshold Voltage | 2.65V |
| Max Reset Threshold Voltage | 2.75V |
| Threshold Voltage | +2.7V |
| Undervoltage Threshold | 2.65V |
| Overvoltage Threshold | 2.75V |
TC54VC2702ECB713 Overview
There are 3 mounting terminals on the voltage supervisor, each of which has a different function. In terms of packaging, power management follows the Tape & Reel (TR) model. Power management is possible to find a series of 1 functions. It is possible to find on this power management a series of 1 channels. The purpose of this IC power is to provide you with a reference of TO-236-3, SC-59, SOT-23-3 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. The supervisor is always powered by a 2V volt supply. IC management conducts in a 1-voltage supply. Power management is included in the Surface Mount mount. The power management system can be categorized as a Power Management Circuits chip. 3 pins are present in total in this power management. This power management has 3 pins. IC management can only work with a supply voltage of 700mV volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 10V volts. The recommended mounting type for IC management is Surface Mount. We recommend setting the supervisors to -40°C~85°C TA degrees. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 3.6μA. To find similar IC managements from the manufacturer, you can always search by TC54VC2702. Measurement and testing should take account of the nominal 2% tolerance this IC management.
TC54VC2702ECB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.6μA operating supply current
TC54VC2702ECB713 Applications
There are a lot of Microchip Technology TC54VC2702ECB713 Voltage Supervisors applications.
- Analog circuit
- Refrigeration
- DSP
- Automotive power systems
- Efficient information transmission
- Magnetic resonance imaging
- Personal computers
- Electric heating appliances
- DVR
- Embedded computing
