TC54VC2902ECB713
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Tolerance | 2% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 240mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC54VC2902 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Output Type | Voltage |
| Max Output Current | 50mA |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 700mV |
| Operating Supply Current | 3.6μA |
| Nominal Supply Current | 1.1μA |
| Power Dissipation | 240mW |
| Adjustable Threshold | NO |
| Quiescent Current | 1.1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.9V |
| Number of Voltages Monitored | 1 |
| Supply Current-Max (Isup) | 0.004mA |
| Min Reset Threshold Voltage | 2.84V |
| Max Reset Threshold Voltage | 2.96V |
| Threshold Voltage | +2.9V |
| Undervoltage Threshold | 2.84V |
| Overvoltage Threshold | 2.96V |
| Height | 1.2954mm |
| Length | 3.0988mm |
| Width | 1.8034mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
TC54VC2902ECB713 Overview
Power management is mounted through 3 terminals. Packaging is in the form of a Tape & Reel (TR). Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. In this PMIC, you can find TO-236-3, SC-59, SOT-23-3 functions for your reference. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. IC management is specified that the package peak reflow temperature should be 260. The supervisor is always powered by a 2V volt supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts IC management. A IC power such as this can be classified as a Power Management Circuits power management system. There are a total of 3 pins on power management. Power managment ic pin count is 3. It is recommended that Vsup should not be less than 700mV for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. Mounting type Surface Mount is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. It is estimated that the voltage supervisor's supply current is 3.6μA. To find similar IC managements from the manufacturer, you can always search by TC54VC2902. Measurement and testing should be noted for this IC management's nominal tolerance of 2%.
TC54VC2902ECB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.6μA operating supply current
TC54VC2902ECB713 Applications
There are a lot of Microchip Technology TC54VC2902ECB713 Voltage Supervisors applications.
- Electrical fire monitoring system
- Embedded computing
- Detection of phase imbalance
- Unattended substation automation
- Important electronics for automotive protection
- Power distribution systems of infant care room
- Microcontroller system
- emergency room
- Magnetic resonance imaging
- Electric heating appliances
