TC54VC4202EZB
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 300mW |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Number of Functions | 1 |
| Supply Voltage | 2.1V |
| Base Part Number | TC54VC4202 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 700mV |
| Operating Supply Current | 3.6μA |
| Power Dissipation | 300mW |
| Adjustable Threshold | NO |
| Quiescent Current | 1.1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.2V |
| Number of Voltages Monitored | 1 |
| Supply Current-Max (Isup) | 0.004mA |
| Min Reset Threshold Voltage | 4.12V |
| Max Reset Threshold Voltage | 4.28V |
| Threshold Voltage | +4.2V |
| Undervoltage Threshold | 4.12V |
| Overvoltage Threshold | 4.28V |
| Height | 5.33mm |
| Length | 5.21mm |
| Width | 4.19mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC54VC4202EZB Overview
A total of 3 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Bulk. Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. For your reference, this PMIC includes a list of TO-226-3, TO-92-3 (TO-226AA) functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In a 2.1V supply voltage, the power management conducts. IC management is possible to find a succession of 1 voltages that have been checked. Through Hole mounts IC management. The power management belongs to the Power Management Circuits subcategory. 3 pins are present in total in this power management. This power management has 3 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 700mV. During this IC power, the maximum supply voltage (Vsup) should not exceed 10V volts. Power management recommends the Through Hole mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. In order to maintain a stable supply current for the power management, 3.6μA is the recommended value. It is always advisable to use TC54VC4202, the base supervisor number, when searching for similar PMICs from the manufacturer.
TC54VC4202EZB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.6μA operating supply current
TC54VC4202EZB Applications
There are a lot of Microchip Technology TC54VC4202EZB Voltage Supervisors applications.
- Power communication system
- Functional modules
- Power distribution systems of ICU
- Automotive permanent magnet synchronous motors
- Sensitive sensors
- Set top box
- Consumer electronics
- Important electronics for automotive safety
- Fire equipment power monitoring system
- Solar power charger
