TC54VC4502ECB713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Tolerance | 2% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 240mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.1V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC54VC4502 |
| Output | Push-Pull, Totem Pole |
| Output Type | Voltage |
| Max Output Current | 50mA |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 700mV |
| Nominal Supply Current | 1.1μA |
| Power Dissipation | 240mW |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.5V |
| Number of Voltages Monitored | 1 |
| Supply Current-Max (Isup) | 0.004mA |
| Min Reset Threshold Voltage | 4.41V |
| Max Reset Threshold Voltage | 4.59V |
| Threshold Voltage | +4.5V |
| Undervoltage Threshold | 4.41V |
| Overvoltage Threshold | 4.59V |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC54VC4502ECB713 Overview
This power management consists of 3 mounting terminals on which it can be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. Please find attached 1 functions for your reference in this IC power. Power management consists of 1 channels, each of which can be used independently. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 2.1V for the PMIC chip, and the chip conducts at that voltage. Power management conducts at a voltage of 1. The power management is mounted by a Surface Mount-axis. A IC power such as this can be classified as a Power Management Circuits power management system. 3 pins are on the supervisor. A voltage (Vsup) that doesn't fall below 700mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. During this IC power, the maximum supply voltage (Vsup) should not exceed 10V volts. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. For similar manage ics search of the manufacturer, you can always refer to TC54VC4502, the base PMIC number. This IC power has a nominal tolerance of 2% which should be noted in measurement and test.
TC54VC4502ECB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
TC54VC4502ECB713 Applications
There are a lot of Microchip Technology TC54VC4502ECB713 Voltage Supervisors applications.
- Battery cars
- DC stabilized power supply module
- Power distribution systems of CCU
- Important electronics for automotive protection
- Data storage applications
- Multi-voltage system
- Leakage protection
- Leakage current detection
- Linux and server computing
- Analog circuit
