TC54VN2102ECB713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Tolerance | 2% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 240mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC54VN2102 |
| Output | Open Drain or Open Collector |
| Output Type | Voltage |
| Max Output Current | 50mA |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 700mV |
| Operating Supply Current | 3.6μA |
| Nominal Supply Current | 1.1μA |
| Power Dissipation | 240mW |
| Adjustable Threshold | NO |
| Quiescent Current | 1.1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.1V |
| Number of Voltages Monitored | 1 |
| Supply Current-Max (Isup) | 0.004mA |
| Min Reset Threshold Voltage | 2.06V |
| Max Reset Threshold Voltage | 2.14V |
| Threshold Voltage | +2.1V |
| Undervoltage Threshold | 2.06V |
| Overvoltage Threshold | 2.14V |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC54VN2102ECB713 Overview
There are 3 terminals connected to this power management, which makes it easy to mount. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Power management is possible to find a series of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. For your reference, this PMIC includes a list of TO-236-3, SC-59, SOT-23-3 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. IC management is specified that the package peak reflow temperature should be 260. In a 2V supply voltage, the power management conducts. In a 1 supply voltage, the PMIC chip conducts. By Surface Mount, IC management has been mounted. There is a subcategory of this power ic known as Power Management Circuits. This power management has 3 pins. Supply voltage (Vsup) should be at least 700mV for this power management. Voltage (Vsup) shouldn't exceed 10V volts in this PMIC. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 3.6μA. It is always advisable to use TC54VN2102, the base supervisor number, when searching for similar PMICs from the manufacturer. Measuring and testing this IC management should note its nominal tolerance 2%.
TC54VN2102ECB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.6μA operating supply current
TC54VN2102ECB713 Applications
There are a lot of Microchip Technology TC54VN2102ECB713 Voltage Supervisors applications.
- Important electronics for automotive safety
- Power distribution systems of infant care room
- Efficient information transmission
- Microcontroller system
- Battery cars
- Electronics installed in the vehicle
- Insulation fault location system
- Automotive power systems
- Utility meter
- Urban rail transit weak current power monitoring
