TC54VN2102EZB
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 300mW |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Number of Functions | 1 |
| Supply Voltage | 2V |
| Base Part Number | TC54VN2102 |
| Output | Open Drain or Open Collector |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 700mV |
| Operating Supply Current | 3.6μA |
| Power Dissipation | 300mW |
| Adjustable Threshold | NO |
| Quiescent Current | 1.1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.1V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 2.06V |
| Max Reset Threshold Voltage | 2.14V |
| Threshold Voltage | +2.1V |
| Undervoltage Threshold | 2.06V |
| Overvoltage Threshold | 2.14V |
| Height | 5.33mm |
| Length | 5.21mm |
| Width | 4.19mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC54VN2102EZB Overview
There are 3 terminals on this power management that allow it to be mounted. There is a Bulk-packaging method applied to IC management. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. As a reference, this IC power includes TO-226-3, TO-92-3 (TO-226AA) functions for your convenience. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Manage ics operate at 2V supply voltages. Power management conducts at a voltage of 1. Power management is included in the Through Hole mount. The power management system can be categorized as a Power Management Circuits chip. There are 3 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 700mV. The maximum supply voltage (Vsup) is not to exceed 10V volts in this IC management. Power management recommends the Through Hole mounting type. You should set the supervisor's temperature during -40°C~85°C TA . There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. The power management's supply current is 3.6μA. To find similar IC managements from the manufacturer, you can always search by TC54VN2102.
TC54VN2102EZB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.6μA operating supply current
TC54VN2102EZB Applications
There are a lot of Microchip Technology TC54VN2102EZB Voltage Supervisors applications.
- Utility meter
- Network equipment
- Important electronics for automotive safety
- Electronics installed in the vehicle
- Radio
- Automotive permanent magnet synchronous motors
- Important electronics for automotive protection
- Digitally controlled LDO regulators circuit
- DVR
- DSP
