Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-236-3, SC-59, SOT-23-3 |
Number of Pins |
3 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
Tolerance |
2% |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
3 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
240mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2V |
Terminal Pitch |
0.95mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
TC54VN2702 |
Output |
Open Drain or Open Collector |
Output Type |
Voltage |
Max Output Current |
50mA |
Number of Channels |
1 |
Max Supply Voltage |
10V |
Min Supply Voltage |
700mV |
Operating Supply Current |
3.6μA |
Nominal Supply Current |
1μA |
Power Dissipation |
240mW |
Adjustable Threshold |
NO |
Quiescent Current |
1.1μA |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
2.7V |
Number of Voltages Monitored |
1 |
Supply Current-Max (Isup) |
0.004mA |
Min Reset Threshold Voltage |
2.65V |
Max Reset Threshold Voltage |
2.75V |
Threshold Voltage |
+2.7V |
Undervoltage Threshold |
2.65V |
Overvoltage Threshold |
2.75V |
Height |
1.3mm |
Length |
3.1mm |
Width |
1.8mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TC54VN2702ECB713 Overview
There are 3 mounting terminals on the voltage supervisor, each of which has a different function. There is a Tape & Reel (TR)-packaging method applied to IC management. In this PMIC, you can find 1 functions for your reference. A series of 1 channels can be found on this supervisor. In this IC management you will find TO-236-3, SC-59, SOT-23-3 functions for you to refer to. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 2V. Power management conducts at a voltage of 1. Surface Mount mounts IC management. There is a subcategory of this power ic known as Power Management Circuits. The pins of the power management system count 3. IC management can only work with a supply voltage of 700mV volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. Supplied with a operating current of 3.6μA, this PMIC is capable of fully function as specified. If you want to search for similar IC managements of this manufacturer, you can always refer to TC54VN2702, which is the base power ics number. When measuring and testing the IC power, it is important to pay attention to the nominal tolerance 2%.
TC54VN2702ECB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.6μA operating supply current
TC54VN2702ECB713 Applications
There are a lot of Microchip Technology TC54VN2702ECB713 Voltage Supervisors applications.
- External alarm
- emergency room
- Electronics installed in the vehicle
- Urban rail transit weak current power monitoring
- Satellite navigation
- Microcontroller system
- Low voltage/high power - AI, GPU
- Fire equipment power monitoring system
- Efficient information transmission
- Power distribution systems of operating room