TC54VN2902EMB713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-243AA |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | SINGLE |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC54VN2902 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 700mV |
| Operating Supply Current | 3.6μA |
| Power Dissipation | 500mW |
| Adjustable Threshold | NO |
| Quiescent Current | 1.1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.9V |
| Number of Voltages Monitored | 1 |
| Supply Current-Max (Isup) | 0.004mA |
| Min Reset Threshold Voltage | 2.84V |
| Max Reset Threshold Voltage | 2.96V |
| Threshold Voltage | +2.9V |
| Undervoltage Threshold | 2.84V |
| Overvoltage Threshold | 2.96V |
| Length | 4.495mm |
| Width | 2.445mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TC54VN2902EMB713 Overview
This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. A Tape & Reel (TR) package is used to package the power management. Please find attached 1 functions for your reference in this IC power. It is possible to find on this power management a series of 1 channels. In this PMIC, you can find TO-243AA functions for your reference. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 2V volt supply. In a 1 supply voltage, the PMIC chip conducts. Power management is included in the Surface Mount mount. The power management system can be categorized as a Power Management Circuits chip. In total, the power management has 3 pins in it. This power management has 3 pins. Supply voltage (Vsup) should be at least 700mV for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 10V volts. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The supply current of the power management is 3.6μA. For similar manage ics search of the manufacturer, you can always refer to TC54VN2902, the base PMIC number.
TC54VN2902EMB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.6μA operating supply current
TC54VN2902EMB713 Applications
There are a lot of Microchip Technology TC54VN2902EMB713 Voltage Supervisors applications.
- Data storage applications
- Linux and server computing
- Magnetic resonance imaging
- Household appliances
- DVR
- WiFi router
- Network equipment
- Medical-specific isolation transformer
- Utility meter
- Electrical fire monitoring system
