Parameters |
Terminal Pitch |
0.95mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
TC54VN3002 |
Output |
Open Drain or Open Collector |
Pin Count |
3 |
Output Type |
Voltage |
Max Output Current |
50mA |
Number of Channels |
1 |
Max Supply Voltage |
10V |
Min Supply Voltage |
700mV |
Operating Supply Current |
3.6μA |
Power Dissipation |
240mW |
Adjustable Threshold |
NO |
Quiescent Current |
1.1μA |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
3V |
Number of Voltages Monitored |
1 |
Supply Current-Max (Isup) |
0.004mA |
Min Reset Threshold Voltage |
2.94V |
Max Reset Threshold Voltage |
3.06V |
Threshold Voltage |
+3V |
Undervoltage Threshold |
2.94V |
Overvoltage Threshold |
3.06V |
Height |
1.2954mm |
Length |
3.0988mm |
Width |
1.8034mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-236-3, SC-59, SOT-23-3 |
Number of Pins |
3 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Cut Tape (CT) |
Published |
2008 |
Tolerance |
2% |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
3 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
240mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2V |
TC54VN3002ECB713 Overview
This power management consists of 3 mounting terminals on which it can be mounted. There is a Cut Tape (CT)-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find TO-236-3, SC-59, SOT-23-3 functions for your reference. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. A supply voltage of 2V is used to conduct the PMIC chip. Power ics operate at 1 supply voltages. Surface Mount mounts IC management. There is a subcategory called Power Management Circuits for this power management. In total, IC powers are 3 pins on the board. 3 pins are on the supervisor. Supply voltage (Vsup) should be at least 700mV for this power management. This IC power should be powered by no more than 10V volts of supply voltage (Vsup). A Surface Mount mounting type is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. In order to maintain a stable supply current for the power management, 3.6μA is the recommended value. To find similar IC managements from the manufacturer, you can always search by TC54VN3002. As IC management of the measurement and testing process, a nominal tolerance of 2% should be noted.
TC54VN3002ECB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.6μA operating supply current
TC54VN3002ECB713 Applications
There are a lot of Microchip Technology TC54VN3002ECB713 Voltage Supervisors applications.
- Leakage protection
- Power communication system
- Computer applications
- Radio
- Battery-powered equipment
- Leakage current detection
- Embedded computing
- Military communications
- Transformer load monitoring equipment
- Important electronics for automotive safety