TC54VN4302ECB713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Tolerance | 2% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 240mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC54VN4302 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Output Type | Voltage |
| Max Output Current | 50mA |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 700mV |
| Operating Supply Current | 3.6μA |
| Nominal Supply Current | 1μA |
| Power Dissipation | 240mW |
| Adjustable Threshold | NO |
| Quiescent Current | 1.1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.3V |
| Number of Voltages Monitored | 1 |
| Supply Current-Max (Isup) | 0.004mA |
| Min Reset Threshold Voltage | 4.21V |
| Max Reset Threshold Voltage | 4.39V |
| Threshold Voltage | +4.3V |
| Undervoltage Threshold | 4.21V |
| Overvoltage Threshold | 4.39V |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC54VN4302ECB713 Overview
A total of 3 terminals are used to mount this power management. Tape & Reel (TR)-packaging is used. To assist you, this IC power includes 1 functions. A series of 1 channels can be found on this supervisor. In this PMIC, you can find TO-236-3, SC-59, SOT-23-3 functions for your reference. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. Manage ics operate at 2V supply voltages. During operation, the power ic is supplied with a voltage of 1. The mount is provided by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. Taking into account all of the pins, this power management has a total of 3. 3 pins make up the power management. Supply voltage (Vsup) should be at least 700mV for this power management. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 10V volts. The mounting type of the supervisors is Surface MountThe supervisors should be set to the following temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. The power management's supply current is 3.6μA. To find similar IC managements from the manufacturer, you can always search by TC54VN4302. This IC power has a nominal tolerance of 2% which should be noted in measurement and test.
TC54VN4302ECB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.6μA operating supply current
TC54VN4302ECB713 Applications
There are a lot of Microchip Technology TC54VN4302ECB713 Voltage Supervisors applications.
- Precision measurement
- Rechargeable batteries
- Important electronics for automotive protection
- Electronics installed in the vehicle
- Household appliances
- External alarm
- Medical-specific isolation transformer
- Low voltage/high power - AI, GPU
- FPGA design
- Display equipment
