Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-243AA |
Number of Pins |
3 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2004 |
Tolerance |
2% |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
3 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Position |
SINGLE |
Terminal Form |
FLAT |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
TC54VN4302 |
Output |
Open Drain or Open Collector |
Pin Count |
3 |
Output Type |
Voltage |
Max Output Current |
50mA |
Number of Channels |
1 |
Max Supply Voltage |
10V |
Min Supply Voltage |
700mV |
Operating Supply Current |
3.6μA |
Power Dissipation |
500mW |
Adjustable Threshold |
NO |
Quiescent Current |
1.1μA |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
4.3V |
Number of Voltages Monitored |
1 |
Supply Current-Max (Isup) |
0.004mA |
Min Reset Threshold Voltage |
4.21V |
Max Reset Threshold Voltage |
4.39V |
Threshold Voltage |
+4.3V |
Undervoltage Threshold |
4.21V |
Overvoltage Threshold |
4.39V |
Length |
4.495mm |
Width |
2.445mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TC54VN4302EMB713 Overview
There are 3 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in the form of a Tape & Reel (TR), power management is easy to use. There are 1 functions included in this PMIC so that you can refer to them. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please find attached TO-243AA functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When a supply voltage of 2V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts power management on the wall. There is a subcategory of this power ic known as Power Management Circuits. 3 pins are present in total in this power management. Pin count of the power management is 3. IC management can only work with a supply voltage of 700mV volts. The maximum supply voltage (Vsup) is not to exceed 10V volts in this IC management. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. For this power management, there is an 3.6μA volt supply current. You can always use TC54VN4302, the base supervisor number, to search for similar PMICs of the manufacturer. When measuring and testing the IC power, it is important to pay attention to the nominal tolerance 2%.
TC54VN4302EMB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.6μA operating supply current
TC54VN4302EMB713 Applications
There are a lot of Microchip Technology TC54VN4302EMB713 Voltage Supervisors applications.
- Household appliances
- Network equipment
- Power distribution systems of ICU
- Analog circuit
- Consumer electronics
- Detection of phase loss
- Medical-specific isolation transformer
- Insulation fault location system
- Transformer load monitoring equipment
- DVR