TC7106ACPL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Power Rating | 10W |
| Max Power Dissipation | 1.23W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC7106A |
| Pin Count | 40 |
| Operating Supply Voltage | 9V |
| Number of Elements | 1 |
| Polarity | Unipolar |
| Configuration | 7 Segment |
| Interface | Parallel |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 800μA |
| Power Dissipation | 1.23W |
| Number of Bits | 3 |
| Converter Type | ADC, DUAL-SLOPE |
| Resolution | 0.4375 B |
| Number of Analog In Channels | 1 |
| Output Bit Code | BINARY |
| Power Consumption | 1.23W |
| Display Type | LCD |
| Negative Supply Voltage-Nom | -4.5V |
| Analog Input Voltage-Min | 2.7V |
| Digits or Characters | A/D 3.5 Digits |
| Height | 4.95mm |
| Length | 53.21mm |
| Width | 14.73mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC7106ACPL Overview
The package follows the same design pattern as Tube.There is a version 40-DIP (0.600, 15.24mm) of the package that includes it as part of it.I would like to point out that this electrical device has a LCD display type.In order to mount this electronic component on the board, Through Hole is used.This electrical part operates at 0°C~70°C degrees Celsius.Terminating transmission lines with devices with matching impedances is called 40 termination.Devices in the TC7106A family include this one.Display drivers is equipped wDisplay driversh 40 pin count.With 40 pins, it is designed.A Through Hole axis is used to mount this electronic component on the board in order to get the best fit.Display drivers is powered from a supply voltage of 4.5V.For 800μA to function properly, it requires current supply.In addition to this, it can also be included in Analog to Digital Converters.If high efficiency is to be achieved, the supply voltage should be maintained at 9V.Drivers is possible to create ADC, DUAL-SLOPE converters based on the input and output voltages of the source.Analog In channels in the electromagnetic spectrum have 1 bandwidths.3 Bits are used in the design of this electronic part.There are essentially 1 elements that make up the structure.
TC7106ACPL Features
40-DIP (0.600, 15.24mm) package
TC7106A family
40 pin count
40 pins
ADC, DUAL-SLOPE converters
1 elements
TC7106ACPL Applications
There are a lot of Microchip Technology TC7106ACPL display drivers applications.
- Small Appliances
- Vacuum Fluorescent Displays
- Panel meters
- Portable lab instruments
- Multiplexing with common-cathode LED displays
- Battery Operated Applications
- Relay Driver
- Calculators and meters
- Bargraph Dlsplays
- Metering
